Wish your awning lamp would come on automatically?

Our Oval LED awning lamp is the solution!

• Inludes 3DprintRV adaptor plate that allows direct mounting of our lamp in same position as original (NO DRILLING)

• Three brightness settings, simply by touching a button!

• Three colour settings available at the touch of a button (White, warm white & orange to keep the bugs away!)

• Simple touch switch operation (simple!).

• LEDS are angled down so they’re not shining directly in your eyes!

• Passive infrared movement sensor to automatically turn the light on at night!

• IP67 ingress protection (water & dust proof)!

• Stainless steel Nyloc hardware utilised (No rust & won’t come loose!)

• Can be switched off at light itself (have to run through all colour modes) or switched off by caravan light switch.

• Lamp saves last setting when power removed. Turns back on with same settings.

• Detailed fitting & operation instructions supplied.

• Compatible with oval shaped awning lights fitted to campers & other caravans (check dimensions for suitability)

• Cable exits in the same position as old lamp.

*

Fitting is really easy!

• Remove the old lamp.

• Connect the wires to the new lamp.

• Screw the new lamp in place (uses same mounting holes!)

Detailed fitting & operation instructions are supplied.

*

12 months warranty.

Design registration: 202317366

*

SPECS:

• 800Lumens at max brightness.

• 140mA at min brightness @ 12.9v.

• 370mA at max brightness @12.9v.

• Base dimensions: 253mm x 90mm.

• Height: 57mm.

Select black or white using the drop down box below.