The fitting of fans inside a fridge is not a new one, so what's different about the Klevacool internal fridge fan system?

• The fans simply clip onto the fins at the back of the fridge. If you don’t have fins, check out our internal fan systems for compressor fridges HERE.

• Thermostat can be easily adjusted to suit your preference. Instructions are included.

• Thermostat probe can be removed from its holder & mounted in a location of your choice.

• LED lights are built into the fan mount, so you can see what’s in your fridge at night!

• Neatly mounted switch provides option to run fans only, fan & interior lights or all off.

• TWO or THREE low power fans to ensure maximum coverage of cooling fins.

• STAINLESS STEEL guards are fitted to the fans to prevent the blades from being blocked.

• Includes 4 meters of 3mm diameter cable with WATERPROOF CONNECTOR!

• All bolts & screws are STAINLESS STEEL, so won’t rust.

• Low current draw:

  • Triple fans: 0.22A when fans are running & 0.04A when off.

  • Twin fans: 0.16A when fans are running & 0.04A when off.

• Simply requires 12v to be connected to the fan system.

  OR

  Can be connected into an existing Klevacool Fridge Vent Fan system for FULLY automatic operation!

• System is fully tested before being sent to you.

• No drilling or zip ties required to mount the fans

• Easily removable

• Cables are simply run through the drain tube at the back of the fridge or, if you don’t have a drain tube, can be run out the front of the door & under the fridge.

• 36 months warranty.

Installation is as simple as: 

1. Clip the fans onto the fins.

2. Connecting the fans to 12v from your van battery management system.

Detailed, step by step instructions with photos are provided & include my phone number for support.

Any questions prior to purchase of a kit will be promptly answered using our contact page or the messenger link in the bottom RH corner of this page.

Aust Patent: 2021103700

Design Registrations : 202013617, 202013616

Klevacool fridge fans have always been recognised for their quality.

Our fridge fan kits now come with a 3 year warranty.

Internal fridge fan can be connected by itself, or for the ultimate system, connect to a Klevacool Fridge Vent system for fully automatic operation! (Instructions included)

Important Notes!

• Installation of these fans is simple, but a power supply is required for them to operate. Wiring will need to be installed from the van electrical system to the vent. 4 meters of wire is included. Wire is 3mm diameter, so will fit through the smallest of drain holes.

• We recommend connecting the fan system to your vans battery management system. This will provide low battery protection.

• If you are unsure how to install this wiring, please consult with your local auto electrician or caravan repair shop.

• Detailed installation instructions are included.

FANS (two or three)

• Size -70mm

• Bearing - Dual Ball bearings with RUBBER SEALS

• Triple fans current draw - 0.22A total  (5.3Ah/day maximum)

• Twin fans current draw - 0.16A total  (3.8Ah/day maximum)

INCLUDED IN KIT

• 1 x Klevacool internal twin or triple fan system, fully assembled & tested with 4 meters of cable

• 1 x fuse holder

• 2 x 2A fuses

• Small zip ties to keep cables neat

• Plastic filament to assist installation

• Detailed installation instructions

This product carries a 36 month warranty.